Losi Black Rhino Ford Raptor Baja Rey RTR

Key Features

• Officially Certified Ford Body Panels and Trim Schemes
• Over the top scale details including customized body, 4-link suspension and more.
• Dynamite® 3800Kv Brushless Power System
• Long Travel 4-link Live Rear Axle
• Long Travel Independent A-Arm Front Suspension
• Easy-Access Motor
• Rear-Loading Battery
• Sealed Metal-Gear Transmission and Diffs
• Coil-over Oil-Filled Shocks
• Waterproof Electronics
• Bolt-On Body Panels and Comprehensive Interior
• LED Light Bar (Front and Rear)
• Aluminum Chassis
• Full-Size Spare Tire
• Spektrum™ DX2E Active™ Radio System
• AVC Traction Control

The Losi® Ford Raptor Baja Rey® is the most authentic looking Desert Truck on the market with the performance and resilience of a race car. Officially certified, it comes equipped with a Dynamite® 3800Kv brushless power system, in addition to a solid rear axle, independent front suspension, and roll cage with upright shocks, so you can tear across all types of rocky off-road terrain. And you'll do so with the full-throttle flexibility that only AVC® technology can offer. Much like the full scale Ford Raptor, the onboard traction control enables you to fly across the desert at speeds in excess of 50mph all while in complete control and totally dialed in. You get an authentic off-road racing experience with injection molded details, light bars and two licensed trim schemes. The Ford Raptor Baja Rey has just raised the bar another level.

What's in the Box?

(1) Ford Raptor Baja Rey: 1/10 4WD RTR Desert Truck
(1) Spektrum™ 6-Channel DSMR® AVC Surface Receiver (installed)
(1) Spektrum™ 9KG 23T Waterproof Servo (installed)
(1) Dynamite® Fuze™ 130A Sensorless Brushless Waterproof ESC (installed)
(1) Dynamite® Fuze™ 550 Brushless Motor 3800Kv (installed)
(1) Spektrum™ DX2E 2.4GHz Transmitter
(4) AA Batteries (for transmitter)
(1) Product Manual

• 2S or 3S Hardcase LiPo battery with EC3 or IC3 port
• Apprioriate LiPo charger

• Type: Desert Truck
• Scale: 1/10
• Length: 21.6" (540mm)
• Width: 12.6" (320mm)
• Height: 7.6" (190mm)
• Ground Clearance: 2.2" (55mm)
• Wheelbase: 14.6" (370mmm)
• Weight: 6.1 lbs (2.8kg)
• Chassis: 0.12" (3mm) thick aluminum
• Suspension: Front, independent, Rear 4-link
• Drivetrain: 4WD Shaft Drive
• Tire Type: Desert Claws, 4.45" (113mm) diameter
• Motor or Engine: 550 size motor
• Speed Control: Dynamite Fuze 130A
• Radio: Spektrum DX2E transmitter with 6-ch DSMR AVC surface receiver
• Servos: Waterproof metal gear steering servo
• Batteries: One 2 or 3S at least 5000mAh hardcase LiPo required
• Charger: LiPo compatible required
• Gear Pitch: 1.0 Module
• Wheel Size: 2.3" (58.4mm) broad, 2.2" (56mm) Outer Diameter, 3.0" (76mm) Inner Diameter
• Kit/RTR: RTR
• Shock Type: Oil-filled, front 3.9" (100mm), 4.8" (122mm) rear
• Body: Four piece screen printed 2018 Ford Raptor certified body
• Ball Bearings: Full set
• Assembly Time: Less than 1 Hour