Savox SW0231MG Servo
The SW0231MG is a budget plan friendly water resistant digital servo with terrific torque for numerous applications. This brushed servo functions a speed of .17 and 208.0 oz-in of torque 6.0V. It integrates leading edge innovation with incredibly high 12-bit (4096) resolution and metal equipments for your higher accuracy when evading puddles. This is a terrific upgrade if your aiming to drive your RC car in any condition...rain, sleet, or snow.
Functions:
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Equipment: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Score: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520
This product is often gotten with the above pointed out product.
This is the Axial 25T Aluminum Servo Horn for Futaba, Axial and Savox Servos.
FEATURES:
Difficult anodized aluminum building
Compression install, 2 screws set up on either side of arm and
tighten up center hole around servo spline
CONSISTS OF:
Axial 25T Aluminum Servo Horn
2 2x8mm socket head screws
SPECIFICATIONS:
Length: 0.98" (25mm) from center of servo installing hole to end of arm
Hole Size: 3mm
Pitch:3x30
This product is often gotten with the above pointed out product.
This is a optional Racers Edge Aluminum single arm servo horn, meant for usage with Futaba servos. This sturdy aluminum servo horn is comparable in design to the Racers Edge Pro Adjustable servo horns, however includes a 3rd linkage installing point and does not utilize lock down screws.
This product praises the above gone over product.
This is the 3-Channel Futaba 3PRKA 2.4GHz FHSS Radio System
with the R203GF Receiver.
FEATURES:
Suitable upgrade for radios discovered in RTR cars
Throttle and guiding trim and reverse
Guiding double rate dial
Throttle end point modification
Channel 3 switch
Throttle fail safe
One year restricted guarantee from Pastime Solutions starting at date
of purchase
CONSISTS OF:
Futaba 3PRKA 2.4GHz FHSS Transmitter, R203GF Receiver, Direction
Handbook and On/Off Change
NEEDS:
Servos of modeler's option
4 AA batteries for transmitter
SPECIFICATIONS:
Transmitter:
Transferring Frequency: 2.4GHz band
Power Requirement: 4 AA cells
Present Drain: 100mA or less
Receiver;
Measurements: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
Weight: 0.28oz (8g)
Operating Voltage: 4.8 - 7.4V (shown servo)
Battery Fail Safe Voltage: 3.8V*
Present Drain: 30mA at no signal
*Battery fail safe voltage is set for 4-cell NiCd/NiMH battery
Battery F/S does not work appropriately when other kind of battery is utilized
REMARKS:
2.4GHz FHSS is not suitable with FASST systems.
Normal mode frame rate is (FHSS/S-FHSS) 13.63ms and accepts any
kind of servos or peripherals.
High-Speed mode (in 4PL tx just), with an output of 6.8ms accepts
digital servos consisting of the BLS series and most peripheral
devices such as brushless ESCs
Functions:
- Integrates cutting edge
innovation with incredibly high 12 bit (4096) resolution and metal gears. - Waterproof.
- Brushed motor
- Very strong metal equipments guarantee long-life and durability.
- Our servos are completely green ? from products to production, these servos are ecologically friendly.
- Ideal for RC vehicles, trucks, buggies, and boats.
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Equipment: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Score: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520
This product is often gotten with the above pointed out product.
This is the Axial 25T Aluminum Servo Horn for Futaba, Axial and Savox Servos.
FEATURES:
Difficult anodized aluminum building
Compression install, 2 screws set up on either side of arm and
tighten up center hole around servo spline
CONSISTS OF:
Axial 25T Aluminum Servo Horn
2 2x8mm socket head screws
SPECIFICATIONS:
Length: 0.98" (25mm) from center of servo installing hole to end of arm
Hole Size: 3mm
Pitch:3x30
This product is often gotten with the above pointed out product.
This is a optional Racers Edge Aluminum single arm servo horn, meant for usage with Futaba servos. This sturdy aluminum servo horn is comparable in design to the Racers Edge Pro Adjustable servo horns, however includes a 3rd linkage installing point and does not utilize lock down screws.
This product praises the above gone over product.
This is the 3-Channel Futaba 3PRKA 2.4GHz FHSS Radio System
with the R203GF Receiver.
FEATURES:
Suitable upgrade for radios discovered in RTR cars
Throttle and guiding trim and reverse
Guiding double rate dial
Throttle end point modification
Channel 3 switch
Throttle fail safe
One year restricted guarantee from Pastime Solutions starting at date
of purchase
CONSISTS OF:
Futaba 3PRKA 2.4GHz FHSS Transmitter, R203GF Receiver, Direction
Handbook and On/Off Change
NEEDS:
Servos of modeler's option
4 AA batteries for transmitter
SPECIFICATIONS:
Transmitter:
Transferring Frequency: 2.4GHz band
Power Requirement: 4 AA cells
Present Drain: 100mA or less
Receiver;
Measurements: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
Weight: 0.28oz (8g)
Operating Voltage: 4.8 - 7.4V (shown servo)
Battery Fail Safe Voltage: 3.8V*
Present Drain: 30mA at no signal
*Battery fail safe voltage is set for 4-cell NiCd/NiMH battery
Battery F/S does not work appropriately when other kind of battery is utilized
REMARKS:
2.4GHz FHSS is not suitable with FASST systems.
Normal mode frame rate is (FHSS/S-FHSS) 13.63ms and accepts any
kind of servos or peripherals.
High-Speed mode (in 4PL tx just), with an output of 6.8ms accepts
digital servos consisting of the BLS series and most peripheral
devices such as brushless ESCs
Brand: Savox
Up Next...
